The journal "Adaptive feed production" publishes articles corresponding to the General profile of the journal. Only electronic version is published. The address of the website on the Internet: www.adaptagro.ru.

Information should have significant scientific novelty, be of interest to a wide range of scientific community and not be published or planned for publication in its essential part in other publications. Preference is given to the most significant results of research and materials on new scientific developments, as well as works with tables and illustrations (2 or more). A bibliographic list is required (preferably at least 10 authors).

The article should be presented in printed and electronic versions. Set is carried out in Microsoft Word, font Times New Roman size-14. Line spacing – single, alignment – width. All fields are 2.5 cm, page numbering in the center, at the bottom of the page. Manuscripts should be fully prepared for printing, grammatically and stylistically verified. As a rule, the volume of the article should not exceed 15 A4 pages (articles of larger volume are placed only by the decision of the members of the Editorial Board).

UDC index (upper left) and publication header (centred) are prepared in upper case, bold, size – 14 pins. Authors ' initials and surnames – lowercase, bold, font size – 14, centered, below the title. The name of the institution where the work was performed – lowercase, italics, font size – 12. The name of one of the authors should be accompanied by an e-mail address.

The form of presentation of experimental works provides for the allocation of sections: introduction, materials and methods; research results and their discussion, conclusion, references.

Titles of articles, authors of articles, the name of the institution where the research is carried out, and summaries are given in two languages (Russian and English). Checking the English language is usually the responsibility of the author. Automated translation using software systems is prohibited and is the basis for the rejection of the article.

We pay special attention to the requirements to the abstracts, which should be:

• informative (not contain common words);
• content (reflect the main content of the article and the results of research);
• structured (follow the logic of the results description in the article);
• compact (recommended volume is not less than 150 words, but not more than 250);
• original and "English", i.e. written in high-quality English (the English version should not be a literal translation of the Russian version, a fully automated translation is also unacceptable)

The abstract is written without breaking into paragraphs and line breaks. After the abstract, place keywords: 5-8 words or phrases on the selected topic.

Figures should be made clearly, clearly and inserted into the text of the individual files of the standard GIF or JPG. Each image is accompanied by a numbering and caption (in the center, bold, font-12). The only figure in the publication is given as Fig. 1. For all figures should be references and discussion in the text.

Tables are also placed after reference to them in the text, the font size for tables – 12. Tables should have a serial number, a short name corresponding to the content.

Presentation of illustrative material (figures, tables, graphs and diagrams) with captions and/or explanations not only in Russian but also in English is welcome.

Formatting of the reference list

For each article a list of references (bibliographic list) is required, in 1 interval 12 font in the format of bibliographic descriptions in accordance with GOST R 7.05-2008 "Bibliographic reference" and GOST R 7.0.11-2011. In the list of references, reference is made to each source in the language in which it is published. It is necessary to give the names of all authors, for collections – all editors. The use of quotations is allowed only with the indication of the source of information. The composition of sources should be relevant and contain, including, modern (not older than 10 years) articles from scientific journals.

Bibliographic references in the text of the article are indicated by the corresponding figure in square brackets. If there are multiple references in parentheses, their numbers are separated by semicolons and spaces. At the end of the article the cited literature is given as a General list in the order of mention.

Also attached to the article is a list of references in combination in Latin and English (translation of the Russian version of the reference). The obligatory English version of references is placed in the article immediately after the list of Russian (original) references. For transliteration it is recommended to use the site: translit.net/ with default settings. On the site choose a transliteration system BGN. Place bibliographic references from the Russian-language list in the working field and press the "translit"button.

When translating a Russian-language source (book, monograph, thesis, electronic resource, etc.) transliteration of authors ' surnames and initials, transliteration and in square brackets translation into English of the source name, year and place of publication, number of pages are given. The place of publication should be given in English (Moscow, Saint-Petersburg, etc.). The transliterated title of the publication is in italics.

If you specify a Russian-language article in the journal, the transliteration and in square brackets translation into English of the title of the article. Also indicate the year of publication, volume, issue number, page of the article. The title of the publication is in italics. It is necessary to include all authors in the description of the article, without reducing them by three, four, etc.

Sample design of the list of references (Latin)

References

Description of Russian books:

Authors (transliteration). The name of the Russian source (transliteration) and italics [Translation of the source name into English]. Place of publication in English: publ publishing House (transliteration)., publication date. Number of pages in the publication.

Example:

1. Nenashev M.F. Poslednee pravitelstvo SSSR [Last government of the USSR]. Moscow: Krom Publ., 1993. 221 p.

Description of Russian-language magazines, collections:

Authors (transliteration). Article title (transliteration) [Translation of the article title into English]. The name of the Russian-language source/journal in italics (transliteration) [Translation of the name of the source/journal into English], year of publication, volume of the journal, issue number, page range in the article.

Examples:

1. Zagurenko A.G., Korotovskikh V.A., Kolesnikov A.A., Timonov A.V., Kardymon D.V. Tekhniko-ekonomicheskaya optimizatsiya dizaina gidrorazryva plasta [Techno-economic optimization of the design of hydraulic fracturing]. Neftyanoe khozyaistvo [Oil Industry], 2008, no. 11, pp. 54-57.

2. Yurchenko V.V. Proyektirovaniye karkasov zdaniy iz tonkostennykh kholodnognutykh profiley v srede SCAD Office [Designing of steel frameworks from thin-walled cold-formed profiles in SCAD Office]. Magazine of Civil Engineering, 2010, no. 8, pp. 38-46.

Electronic publication:

Example:

1. Trofimova L. S., Trofimov I. A., Yakovleva E. P., a Database on natural forage lands of Western Siberia [Electronic resource] // Adaptive fodder production. - 2015. - № 1. - P. 6-13. – URL: http://www.adaptagro.ru (accessibly: 30.03.2015).

1. Trofimova L.S., Trofimov I.A., Jakovleva E.P. Baza dannyh po prirodnym kormovym ugod'jam zapadnoj Sibiri [Database of natural grasslands of West Siberia] Adaptivnoe kormoproizvodstvo [Adaptive Fodder Production], 2015, no. 1, pp. 6–13. URL: http://www.adaptagro.ru (accessibly 30.03.2015).

Electronic publications to which the international organization has assigned a DOI (Digital object identifier) or digital identifier are described in the same way as printed publications, with the DOI without a dot after it. In this case, the URL is not provided because the DOI uniquely identifies the object in the databases, unlike the network address, which can change.

Example:

1. D'Addato A.V. Secular trends in twinning rates. Journal of biosocial science, 2007, vol. 39, no. 1, pp. 147–151. doi:10.1017/s0021932006001337

Description of English books:

Example:

1. Niemi E. Structural Stress Approach to Fatigue Analysis of Welded Components. Designer’s Guide. London, 2000, 102 p.

Description of English magazines, collections:

Examples:

1. Kaplin V.V., Uglov S. R., Bulaev O.F., Goncharov V.J., Voronin A.A., Piestrup M.A. Tunable, monochromatic x rays using the internal beam of a betatron. Applied Physics Letters, 2002, vol. 80, no. 18, pp. 3427-3429.

2. Swaminathan V., Lepkoswka-White E., Rao B.P. Browsers or buyers in cyberspace? Journal of Computer - Mediated Communication, 1999, vol. 5, no. 2. http://www.ascusc.org/jcmc/vol5/issue2/ (accessed February 7, 2011).

Please note that the bibliographic records (References) do not use the separating characters ("//" and "–").

According to the decision of the Editorial Board, since 2014 for publication in the journal"Adaptive fodder production" accepted author's work in which self-citation (authorship or co-authorship) does not exceed 30% of the total number of bibliographic references to the article. In case of non-compliance with these requirements, the article is not considered by the editors and returned to the authors for revision. The date of receipt is the date of receipt by the editorial office of the final version of the article.

One copy of the manuscript with the signatures of all authors, as well as the electronic version of the article (on a disk or other electronic medium), should be sent to the address: 141055, Moscow region, Lobnya, scientific town, K.3, FSC "VIC them. W. R. Williams."

To accelerate the publication of materials for publication and information about the authors in electronic form can be sent to address: adaptagro@vniikormov.ru

Acceptance of articles is carried out before the 15th of the month preceding the next issue, and after the 15th of the set of materials for the next issue.

Our publication ethics is mainly based on the provisions of the "Code of conduct and best practices for journal editors" (Committee on publication ethics, 2011) and the recommendations of the Committee on Publication Ethics (COPE) posted on the website publicationethics.org.

Adaptive feed production magazine is independent from sponsors and places advertisements and announcements in the volume not exceeding 5% of the issue content.

The editorial Board decides on the publication of the articles submitted for consideration, based on their scientific significance, novelty, originality and clarity of presentation, according to the profile of the journal, as well as taking into account the current legislation in the field of libel, copyright and plagiarism. The decision to accept or reject materials for publication and the reasons for this should be clearly communicated to the authors and reviewers. If the article is rejected, the author has the right to appeal. However, the editorial Board is not obliged to cancel its decision.

The editor and the editorial staff are obliged to respect the confidentiality of the information provided in the manuscript. However, the editorial Board provides its database, if necessary, for expert evaluation, at the request of the inspection and regulatory authorities, as well as the Higher attestation Commission of the Russian Federation (HAC RF).

All members of the Editorial Board should be familiar with the concept, policy and ethics of the journal. Final decisions are the responsibility of the editor-in-chief.

The reviewing process assists the editor and Editorial Board in making decisions and may also assist the author in improving the paper.

The article selected for publication is considered by the members of the Editorial Board or involved reviewers with sufficient competence and experience in this field, not involved in a possible conflict of interest. Any expert who considers his / her qualification insufficient to consider the research presented in the manuscript, or is sure that it is impossible to promptly review the article, should notify the editor and refuse to review.

Authors ' recommendations on the choice of reviewers are welcome, as well as articles provided with a review of a specialist on the problem under consideration, with an academic degree not lower than a doctor of science. The editorial Board is not obliged to disclose the identity of the reviewers, except when an open system of expert evaluation.

Any manuscripts submitted for evaluation should be treated as confidential documents and should not be discussed with other reviewers without the prior permission of the editor. The expert assessment should be objective; the reviewer's opinion should be clear and reasoned, assessing, first of all, the problems of research and the absence of violations of publication ethics (suspicions of plagiarism, forgery, falsification).

Reviewers should identify cases where the published work uses materials not specified in the bibliography. Any observations, conclusions or arguments taken from other publications should be appropriately formatted as citations with a bibliographic reference.

Experts should not participate in the examination of works in the presence of a conflict of interest due to competitive relations, cooperation or other interactions or relationships with authors, companies or institutions, in any way related to the submitted manuscripts.

Conditions of publication of articles in the scientific electronic journal "Adaptive feed production" are due to the requirements of international scientometric databases Scopus, Agris and others, as well as the criteria of the RF HAC for inclusion in the List of leading peer-reviewed scientific journals and publications in which the main scientific results of dissertations for the degree of doctor and candidate of Sciences should be published.

In accordance with international copyright laws, the materials of the website, electronic journal, other electronic information resource or project may not be reproduced in whole or in part in any form (electronic or printed) without the prior written consent of the authors and the editorial Board.

The decision on publication (or rejection) of the article is made after its consideration for compliance with the formal and substantive requirements (criteria), and in case of refusal of publication, the editorial Board informs the author by e-mail with the reasons for refusal (shortcomings). If the shortcomings are eliminated by the author, the article is considered again as a new one. The editorial Board does not return manuscripts.

Accepted for publication articles are reviewed internally by members of the Editorial Board or specially involved reviewers – specialists in the scientific direction of the article. The involvement of reviewers is carried out if necessary, determined by the members of the Editorial Board.

The purpose of the internal review is to assess the quality of the scientific article according to the following criteria:

• correspondence of the article title to its content;
• substantiation of the relevance of the problem to be solved and the submitted materials;
• logical and consistent presentation;
• scientific novelty and practical significance of the results;
• availability of reasoned conclusions on the results of the work;
• correct references to the literature and other sources.

When receiving a negative internal review, the editorial Board reserves the right not to publish the article.

After the article is accepted for publication, the author will be sent proofreading, which should be checked and immediately sent to the editor. Failure to receive proofreading after 10 days from the date of sending does not guarantee the accounting of the author's edits. If there are several authors, proofreading is sent to the first author, unless it is specifically indicated to whom it should be sent.

At the end of the article it is necessary to provide information about the authors: full names and patronymic of the whole team of authors, academic degree and position, place of work (name of organization, city, country), as well as contact phone number and e-mail address of one of the authors (corresponding). This information is necessary for the editorial feedback with the authors and the correct reflection of the indexation of the author's works in the RSCI.

One copy of the manuscript signed by all authors, as well as electronic versions of the articles (on disk or other electronic media), sent to the address: 141055, Moscow region, Lobnya, Science complex, building 3, Federal scientific center FEDERAL state budgetary scientific institution "VIC them. W. R. Williams." To accelerate the publication of materials for publication and information about the authors in electronic form can be sent to the address: adaptagro@vniikormov.ru

Acceptance of articles is carried out before the 15th of the month preceding the next issue, and after the 15th of the set of materials for the next issue.

Authorship policy is consistent with standards within the relevant field. Applicable laws and copyright conventions should be followed.

Authors should adhere to the requirements that the submitted work is an original study and has not been published elsewhere in any language.

Papers containing reliable results and objective discussion of their scientific significance should be submitted for consideration. Citation and references to the works and / or statements of other scientists should be formalized accordingly. Publications that have influenced the nature of the work submitted for publication should also be indicated.

Authors should be prepared to provide open access to the source data of their research for editorial review and to provide access to such information to any competent professionals for at least ten years after publication, provided that confidentiality is maintained and legal rights regarding patented developments do not prevent their publication.

For multidisciplinary and collaborative research, the list of co-authors should include all participants who have made significant contributions and are responsible for each aspect of the work. Individual contributions can be specified in a special section or at the end of the article, and ideally, this should be announced in the author's application submitted to the journal. Also, the author should make sure that all co-authors have approved the final version of the article and agreed to submit it for publication.

Copyright applies to all published materials, such as tables, figures or extensive quotations, which can only be reproduced with appropriate permission and confirmation.

Disputes over authorship (that is, disagreements that arose before or after publication) can be resolved by a court decision, on the basis of which there is a correction of authorship in published works.

In case the author finds a significant error or inaccuracy in the published work, it is his duty to promptly inform the editor of the journal and assist in correcting the article, removing it from publication or issue a refutation.

The journal "Adaptive feed production" publishes articles corresponding to the General profile of the journal. Only electronic version is published. The address of the website on the Internet: www.adaptagro.ru.

Information should have significant scientific novelty, be of interest to a wide range of scientific community and not be published or planned for publication in its essential part in other publications. Preference is given to the most significant results of research and materials on new scientific developments, as well as works with tables and illustrations (2 or more). A bibliographic list is required (preferably at least 10 authors).

The article should be presented in printed and electronic versions. Set is carried out in Microsoft Word, font Times New Roman size-14. Line spacing – single, alignment – width. All fields are 2.5 cm, page numbering in the center, at the bottom of the page. Manuscripts should be fully prepared for printing, grammatically and stylistically verified. As a rule, the volume of the article should not exceed 15 A4 pages (articles of larger volume are placed only by the decision of the members of the Editorial Board).

UDC index (upper left) and publication header (centred) are prepared in upper case, bold, size – 14 pins. Authors ' initials and surnames – lowercase, bold, font size – 14, centered, below the title. The name of the institution where the work was performed – lowercase, italics, font size – 12. The name of one of the authors should be accompanied by an e-mail address.

The form of presentation of experimental works provides for the allocation of sections: introduction, materials and methods; research results and their discussion, conclusion, references.

Titles of articles, authors of articles, the name of the institution where the research is carried out, and summaries are given in two languages (Russian and English). Checking the English language is usually the responsibility of the author. Automated translation using software systems is prohibited and is the basis for the rejection of the article.

We pay special attention to the requirements to the abstracts, which should be:

• informative (not contain common words);
• content (reflect the main content of the article and the results of research);
• structured (follow the logic of the results description in the article);
• compact (recommended volume is not less than 150 words, but not more than 250);
• original and "English", i.e. written in high-quality English (the English version should not be a literal translation of the Russian version, a fully automated translation is also unacceptable)

The abstract is written without breaking into paragraphs and line breaks. After the abstract, place keywords: 5-8 words or phrases on the selected topic.

Figures should be made clearly, clearly and inserted into the text of the individual files of the standard GIF or JPG. Each image is accompanied by a numbering and caption (in the center, bold, font-12). The only figure in the publication is given as Fig. 1. For all figures should be references and discussion in the text.

Tables are also placed after reference to them in the text, the font size for tables – 12. Tables should have a serial number, a short name corresponding to the content.

Presentation of illustrative material (figures, tables, graphs and diagrams) with captions and/or explanations not only in Russian but also in English is welcome.

Formatting of the reference list

For each article a list of references (bibliographic list) is required, in 1 interval 12 font in the format of bibliographic descriptions in accordance with GOST R 7.05-2008 "Bibliographic reference" and GOST R 7.0.11-2011. In the list of references, reference is made to each source in the language in which it is published. It is necessary to give the names of all authors, for collections – all editors. The use of quotations is allowed only with the indication of the source of information. The composition of sources should be relevant and contain, including, modern (not older than 10 years) articles from scientific journals.

Bibliographic references in the text of the article are indicated by the corresponding figure in square brackets. If there are multiple references in parentheses, their numbers are separated by semicolons and spaces. At the end of the article the cited literature is given as a General list in the order of mention.

Also attached to the article is a list of references in combination in Latin and English (translation of the Russian version of the reference). The obligatory English version of references is placed in the article immediately after the list of Russian (original) references. For transliteration it is recommended to use the site: translit.net/ with default settings. On the site choose a transliteration system BGN. Place bibliographic references from the Russian-language list in the working field and press the "translit"button.

When translating a Russian-language source (book, monograph, thesis, electronic resource, etc.) transliteration of authors ' surnames and initials, transliteration and in square brackets translation into English of the source name, year and place of publication, number of pages are given. The place of publication should be given in English (Moscow, Saint-Petersburg, etc.). The transliterated title of the publication is in italics.

If you specify a Russian-language article in the journal, the transliteration and in square brackets translation into English of the title of the article. Also indicate the year of publication, volume, issue number, page of the article. The title of the publication is in italics. It is necessary to include all authors in the description of the article, without reducing them by three, four, etc.

Sample design of the list of references (Latin)

References

Description of Russian books:

Authors (transliteration). The name of the Russian source (transliteration) and italics [Translation of the source name into English]. Place of publication in English: publ publishing House (transliteration)., publication date. Number of pages in the publication.

Example:

1. Nenashev M.F. Poslednee pravitelstvo SSSR [Last government of the USSR]. Moscow: Krom Publ., 1993. 221 p.

Description of Russian-language magazines, collections:

Authors (transliteration). Article title (transliteration) [Translation of the article title into English]. The name of the Russian-language source/journal in italics (transliteration) [Translation of the name of the source/journal into English], year of publication, volume of the journal, issue number, page range in the article.

Examples:

1. Zagurenko A.G., Korotovskikh V.A., Kolesnikov A.A., Timonov A.V., Kardymon D.V. Tekhniko-ekonomicheskaya optimizatsiya dizaina gidrorazryva plasta [Techno-economic optimization of the design of hydraulic fracturing]. Neftyanoe khozyaistvo [Oil Industry], 2008, no. 11, pp. 54-57.

2. Yurchenko V.V. Proyektirovaniye karkasov zdaniy iz tonkostennykh kholodnognutykh profiley v srede SCAD Office [Designing of steel frameworks from thin-walled cold-formed profiles in SCAD Office]. Magazine of Civil Engineering, 2010, no. 8, pp. 38-46.

Electronic publication:

Example:

1. Trofimova L. S., Trofimov I. A., Yakovleva E. P., a Database on natural forage lands of Western Siberia [Electronic resource] // Adaptive fodder production. - 2015. - № 1. - P. 6-13. – URL: http://www.adaptagro.ru (accessibly: 30.03.2015).

1. Trofimova L.S., Trofimov I.A., Jakovleva E.P. Baza dannyh po prirodnym kormovym ugod'jam zapadnoj Sibiri [Database of natural grasslands of West Siberia] Adaptivnoe kormoproizvodstvo [Adaptive Fodder Production], 2015, no. 1, pp. 6–13. URL: http://www.adaptagro.ru (accessibly 30.03.2015).

Electronic publications to which the international organization has assigned a DOI (Digital object identifier) or digital identifier are described in the same way as printed publications, with the DOI without a dot after it. In this case, the URL is not provided because the DOI uniquely identifies the object in the databases, unlike the network address, which can change.

Example:

1. D'Addato A.V. Secular trends in twinning rates. Journal of biosocial science, 2007, vol. 39, no. 1, pp. 147–151. doi:10.1017/s0021932006001337

Description of English books:

Example:

1. Niemi E. Structural Stress Approach to Fatigue Analysis of Welded Components. Designer’s Guide. London, 2000, 102 p.

Description of English magazines, collections:

Examples:

1. Kaplin V.V., Uglov S. R., Bulaev O.F., Goncharov V.J., Voronin A.A., Piestrup M.A. Tunable, monochromatic x rays using the internal beam of a betatron. Applied Physics Letters, 2002, vol. 80, no. 18, pp. 3427-3429.

2. Swaminathan V., Lepkoswka-White E., Rao B.P. Browsers or buyers in cyberspace? Journal of Computer - Mediated Communication, 1999, vol. 5, no. 2. http://www.ascusc.org/jcmc/vol5/issue2/ (accessed February 7, 2011).

Please note that the bibliographic records (References) do not use the separating characters ("//" and "–").

According to the decision of the Editorial Board, since 2014 for publication in the journal"Adaptive fodder production" accepted author's work in which self-citation (authorship or co-authorship) does not exceed 30% of the total number of bibliographic references to the article. In case of non-compliance with these requirements, the article is not considered by the editors and returned to the authors for revision. The date of receipt is the date of receipt by the editorial office of the final version of the article.

One copy of the manuscript with the signatures of all authors, as well as the electronic version of the article (on a disk or other electronic medium), should be sent to the address: 141055, Moscow region, Lobnya, scientific town, K.3, FSC "VIC them. W. R. Williams."

To accelerate the publication of materials for publication and information about the authors in electronic form can be sent to address: adaptagro@vniikormov.ru

Acceptance of articles is carried out before the 15th of the month preceding the next issue, and after the 15th of the set of materials for the next issue.

Our publication ethics is mainly based on the provisions of the "Code of conduct and best practices for journal editors" (Committee on publication ethics, 2011) and the recommendations of the Committee on Publication Ethics (COPE) posted on the website publicationethics.org.

Adaptive feed production magazine is independent from sponsors and places advertisements and announcements in the volume not exceeding 5% of the issue content.

The editorial Board decides on the publication of the articles submitted for consideration, based on their scientific significance, novelty, originality and clarity of presentation, according to the profile of the journal, as well as taking into account the current legislation in the field of libel, copyright and plagiarism. The decision to accept or reject materials for publication and the reasons for this should be clearly communicated to the authors and reviewers. If the article is rejected, the author has the right to appeal. However, the editorial Board is not obliged to cancel its decision.

The editor and the editorial staff are obliged to respect the confidentiality of the information provided in the manuscript. However, the editorial Board provides its database, if necessary, for expert evaluation, at the request of the inspection and regulatory authorities, as well as the Higher attestation Commission of the Russian Federation (HAC RF).

All members of the Editorial Board should be familiar with the concept, policy and ethics of the journal. Final decisions are the responsibility of the editor-in-chief.

The reviewing process assists the editor and Editorial Board in making decisions and may also assist the author in improving the paper.

The article selected for publication is considered by the members of the Editorial Board or involved reviewers with sufficient competence and experience in this field, not involved in a possible conflict of interest. Any expert who considers his / her qualification insufficient to consider the research presented in the manuscript, or is sure that it is impossible to promptly review the article, should notify the editor and refuse to review.

Authors ' recommendations on the choice of reviewers are welcome, as well as articles provided with a review of a specialist on the problem under consideration, with an academic degree not lower than a doctor of science. The editorial Board is not obliged to disclose the identity of the reviewers, except when an open system of expert evaluation.

Any manuscripts submitted for evaluation should be treated as confidential documents and should not be discussed with other reviewers without the prior permission of the editor. The expert assessment should be objective; the reviewer's opinion should be clear and reasoned, assessing, first of all, the problems of research and the absence of violations of publication ethics (suspicions of plagiarism, forgery, falsification).

Reviewers should identify cases where the published work uses materials not specified in the bibliography. Any observations, conclusions or arguments taken from other publications should be appropriately formatted as citations with a bibliographic reference.

Experts should not participate in the examination of works in the presence of a conflict of interest due to competitive relations, cooperation or other interactions or relationships with authors, companies or institutions, in any way related to the submitted manuscripts.

Conditions of publication of articles in the scientific electronic journal "Adaptive feed production" are due to the requirements of international scientometric databases Scopus, Agris and others, as well as the criteria of the RF HAC for inclusion in the List of leading peer-reviewed scientific journals and publications in which the main scientific results of dissertations for the degree of doctor and candidate of Sciences should be published.

In accordance with international copyright laws, the materials of the website, electronic journal, other electronic information resource or project may not be reproduced in whole or in part in any form (electronic or printed) without the prior written consent of the authors and the editorial Board.

The decision on publication (or rejection) of the article is made after its consideration for compliance with the formal and substantive requirements (criteria), and in case of refusal of publication, the editorial Board informs the author by e-mail with the reasons for refusal (shortcomings). If the shortcomings are eliminated by the author, the article is considered again as a new one. The editorial Board does not return manuscripts.

Accepted for publication articles are reviewed internally by members of the Editorial Board or specially involved reviewers – specialists in the scientific direction of the article. The involvement of reviewers is carried out if necessary, determined by the members of the Editorial Board.

The purpose of the internal review is to assess the quality of the scientific article according to the following criteria:

• correspondence of the article title to its content;
• substantiation of the relevance of the problem to be solved and the submitted materials;
• logical and consistent presentation;
• scientific novelty and practical significance of the results;
• availability of reasoned conclusions on the results of the work;
• correct references to the literature and other sources.

When receiving a negative internal review, the editorial Board reserves the right not to publish the article.

After the article is accepted for publication, the author will be sent proofreading, which should be checked and immediately sent to the editor. Failure to receive proofreading after 10 days from the date of sending does not guarantee the accounting of the author's edits. If there are several authors, proofreading is sent to the first author, unless it is specifically indicated to whom it should be sent.

At the end of the article it is necessary to provide information about the authors: full names and patronymic of the whole team of authors, academic degree and position, place of work (name of organization, city, country), as well as contact phone number and e-mail address of one of the authors (corresponding). This information is necessary for the editorial feedback with the authors and the correct reflection of the indexation of the author's works in the RSCI.

One copy of the manuscript signed by all authors, as well as electronic versions of the articles (on disk or other electronic media), sent to the address: 141055, Moscow region, Lobnya, Science complex, building 3, Federal scientific center FEDERAL state budgetary scientific institution "VIC them. W. R. Williams." To accelerate the publication of materials for publication and information about the authors in electronic form can be sent to the address: adaptagro@vniikormov.ru

Acceptance of articles is carried out before the 15th of the month preceding the next issue, and after the 15th of the set of materials for the next issue.

Abilov Batyrkhan North Caucasus FARC (Leading Researcher)
candidate of agricultural sciences

docent

Abramyan Anton Federal'noe gosudarstvennoe byudzhetnoe nauchnoe uchrezhdenie «Federal'nyy nauchnyy centr kormoproizvodstva i agroekologii imeni V.R. Vil'yamsa»
doctor of agricultural sciences ,
doctor of agricultural sciences

professor ,
professor

Adamko Vasily Novozybkovskaya SHOS – filial FNC «VIK im. V.R. Vil'yamsa» (director)
candidate of agricultural sciences

Alenicheva Anastasiya Dmitrievna FGBUN Glavnyy botanicheskiy sad im. N.V. Cicina RAN

Altantsetse L Research Institute of Animal Husbandry

Anisimov Anatoly Federal Williams Research Center of Forage Production and Agroecology (director)
candidate of agricultural sciences

Antonov Alexey Federal State Budget Sciences Institution «Federal Williams Research Center of Forage Production and Agroecology»

Arzamasova Ekaterina FGBNU FANC Severo-Vostoka
candidate of agricultural sciences

Afonina Elena VNII lyupina – filial FNC «VIK im. V.R. Vil'yamsa»
candidate of sciences in biology

Bakshaev Dmitriy Sibirskiy nauchno-issledovatel'skiy institut kormov Sibirskogo federal'nogo nauchnogo centra agrobiotehnologiy Rossiyskoy akademii

Batakova Olga Federal'nyy issledovatel'skiy centr kompleksnogo izucheniya Arktiki imeni akademika N.P. Laverova Ural'skogo otdeleniya Rossiyskoy akademii nauk
candidate of agricultural sciences

Batsukh T. Research Institute of Animal Husbandry, Mongolian University of Life Sciences

Bayarsaikhan Sh Research Institute of Animal Husbandry

Beisen B. Research Institute of Animal Husbandry, Mongolian University of Life Sciences

Belomozhnov Timofey Dmitrievich Federal'nyy nauchnyy centr kormoproizvodstva i agroekologii imeni V. R. Vil'yamsa (aspirant)

Bliadze Vasily Kaliningradskiy NIISH – filial FNC «VIK im. V.R. Vil'yamsa»

Buyankin Nikolay Kaliningrad Research Institute of Agriculture – Branch of the Federal Williams Research Center
doctor of agricultural sciences

VAHRUShEVA Vera Viktorovna Severo-Zapadnyy NII molochnogo i lugopastbischnogo hozyaystva imeni A.S. Emel'yanova
candidate of agricultural sciences

Vlasova Albina FGBNU VNII rapeseed

Volovik Valentina Federal State Budget Sciences Institution «Federal Williams Research Center of Forage Production and Agroecology» (head of laboratory)
candidate of agricultural sciences

docent

• « 
• 1
• 2
• 3
• 4
• 5
• …
• 10
•  »

UDK